Showing posts with label Shaker. Show all posts
Showing posts with label Shaker. Show all posts

June 28, 2017

Winnie & Walter June 2017 Release Premiere Day #2


Hi and welcome to Day 2 of Winnie & Walter's June release! Today we are showcasing From the Bottom of My Heart (+ coordinating dies), the free with qualifying $25 purchase stamp set: Happy Birthday to You, Sentimental: Birthday, and Big Balloon Cutaways. 


For today's card I decided to create a large shaker using the super fun balloon cutaways. I left the largest two dies attached so I can die cut multiple balloon frames that have exactly the same size. I adhered two fun foam frames together to create the wall of the shaker, and used a glitter frame and acetate for the front window.

 
I really wanted to create a festive birthday card with lots of vibrant colors, so naturally I went with rainbow colors. After some trial and errors, I decided to stamp the cake image (from the Happy Birthday to You set) with Neon Red, Orange Soda, and Butter Bar Hero Arts shadow ink. I wanted to create an ombre effect so once I've inked up the stamp (top left photo), I used my finger and tapped on the inked edge (top right photo) to remove the harsh lines. (Bottom left photo)

 
For the middle shade, or Orange Soda in this case, I tapped on both the top edge and the bottom edge. 

 
Sometimes you leave fingerprints on the stamp while you're tapping, but that's okay because you won't see them after layering two or three more coats of ink. (Thanks to the MISTI. Gotta love this tool!)


I completed the rainbow look by watercoloring the background with Mowed Lawn, Lucky Clover, Peacock Feathers, Salty Ocean, Blueprint Sketch, Dusty Concord and Wilted Violet distress inks. Then I added a handful of colorful sequins to the shaker window. 

I did add some more texture to the card front by stenciling embossing paste with Scenery: Spotty Creative Screenings (to be featured on Thursday, June 29), although you can barely see it from the photos. Finally, I embellished the balloon with a silver bow and gemstone and that completes the card! I hope this colorful card has brightened up your day a little, thanks so much for stopping by and I'll see you again tomorrow!

Challenges Entered:
 
SSS Monday: Stencil It / SSS Wednesday: ATG / W&W June Color Combo Challenge: The vibrant and bold color scheme is inspired by Heather's H.'s card shown here.

 
 Word Art Wednesday: ATG / Cas-ual Fridays: Tic Tac Toe (Shaker card, rainbow, add texture)

  
7Kids: ATG (I used Tim Holtz Distress Watercolor Cardstock and Distress Ink Kit 1 / Kit 2) / Paru's Card Making Challengs: Birthday

April 28, 2017

Brew-tiful Day ft. Craftin Desert Divas


Good morning!! Are you still feeling a little sleepy? Then this coffee shaker card is the perfect one for you! I received a bag of coffee beans a long time ago and it's been sitting in my kitchen for the longest time because I don't drink coffee... So I thought I'd use them in my card today. :P 


I created the window frame with some burlap paper and watercolored the background with ZIG markers. Then I colored the stovetop coffee maker image with Copics. The sentiment is handwritten and I can't help but create another punny one. I hope you enjoyed it and thanks so much for stopping by!

Challenges Entered: 

April 16, 2017

Cool Birthday ft. Lawn Fawn


I have a quick and short post for you today: It's about the shaker card I made for the new Lawn Fawn challenge! I used the Here's a Scoop set from Lawn Fawn and colored the images with Copic markers. Next I used the square frame image from Winnie & Walter's Framed set to create my shaker window. I decided to write the punny sentiment with a white gel pen. Then I cut the sentiment strip into three segments for a more appealing visual effect, and that completes the card!

Challenges Entered: 
  

March 5, 2017

Shine Bright Like A Diamond ft. Winnie & Walter


Good morning! I'm excited to share with you a card that features gold, glitter, ombre colors, dies and a bunch of sequins! I didn't use any stamps on this card, but it surely has some of my most favorite cardmaking elements. 


I remember the first Winnie & Walter product I bought was their My Precious stamp set. I loved the diamond/jewels images and soon after added the Flawless Diamond Cutaways to my collection as well. I just couldn't resist getting these beauties ;) Then during last year's Black Friday sale, I picked up the "shine" and "bright" word dies because I thought it would be really fun to combine all of these dies to create a card. And this is what I came up with! It took me quite some time to design and figure out how I want to arrange everything, but I think it was well worth the time and effort as I'm pretty pleased with the result. :)


I started out by die cutting the words from gold foil and silver glitter cardstock. Then I picked three shades of pink Copic markers (R20, RV32, RV34. light to dark) and blended them onto the glitter die cut. I originally created the ombre from left to right, but then realized that there aren't a lot of space between each letter to actually allow the colors to blend and form the gradient. So I tried blending again but this time in the top to bottom direction. Yup, looks much better. I've also die cut the words from fun foam and adhered the pieces together.

 
I adhered a strip of pink patterned paper temporarily to my card front and die cut the diamond shape. (Left photo) Next I separated them and embossed the gray panel with We R Memory Keepers Next Level Gemstone embossing folder. Then I adhered them back together and added my acetate window. I've also foam mounted the entire panel except for the acetate part. For the detailed diamond die cut, I applied some Stick It adhesive to the back of my silver cardstock before die cutting it. (Note: Use a shim when die cutting)

 
Then I simply peeled off the release paper and stuck the diamond outline to the acetate window. (Left photo) Love this no-mess method of adhering detailed die cuts. I decided to add a piece of patterned paper as the background of my shaker window. (Right photo)

 
Now it's time for the best part! I'm using this pink and gold sequin mix from Winnie & Walter. It was included in my order as a thank you gift, and I absolutely love it! You can probably tell that it's also the source of inspiration for this card's color scheme. I went ahead and adhered some of the sequins and beads to the polka dot background so that when the card is standing upright, there will still be some sequins in the top part of the shaker. (Left photo) Remember to save a couple of sequins if you are planning on embellishing the card front. 


Now it's time to do some final touch ups. I noticed that there are some scratches on my gold foil die cut so I applied a coat of glossy accent on top. Can you tell the difference? In this picture I've only coated the "ine" part and it looks a lot smoother and shinier. 


I added a little "like a" sentiment. (Hopefully my handwriting looks okay) I also adhered a strip of dark grey glitter card stock between the pink strip and and the gray panel, and that finishes off the card!


I'm pretty happy about how this shaker card turned out. The creating process is a little time consuming, as I spent a lot of time piecing the elements together and paid a lot of attention to the details, but it's very satisfactory and enjoyable as well. I hope you liked my creation, and thanks so much for stopping by!

Challenges Entered: 
 
Winnie & Walter 3rd Birthday Bash: Three Challenge (I used three colors: pink, gold, gray) / Sequin Challenge / Bright Colors Challenge / Mood Board Challenge (Geometric background and pink strip of patterned paper inspired by the geometric patterns in the mood board. Shown below) / Off the Page Challenge // Paru's Card Making Challenges: 3 Colors

    
Time Out: Love/Friendship (I chose the friendship theme) / Dies R Us: Something new (First time using "shine" and "bright" dies) / Krumspring: Triangles (triangles in the diamond, background and patterned paper)

7 Kids: ATG (I used R20 Copic marker)

October 4, 2016

Diamond Shaker Card ft. Winnie & Walter

I was determined to make a shaker card when I ordered this diamond cutaway from Winnie & Walter. I also wanted each facet to showcase a different shade and texture of a metallic color (silver, gold, and rose gold to be exact). What I forgot to take into consideration is the size of this die; for some reason I thought it would cover up an A2 size card front, and boy, was I wrong. I was skeptical about mounting the diamond outline on foam to make the shaker since the lines are so thin, but I gave it a try anyways. After hours of embossing, die-cutting, aligning and piecing all the little pieces together, this diamond really came to life and sparkled like no other. :)

I die-cutted the outline from a piece of cardstock with double sided adhesive on top. After poking out the triangular pieces and peeling off the release paper, I sprinkled on Elizabeth Craft's microfine glitter and burnished it with a bone folder. Then I die cut a piece of acetate and adhered it to the glitter die cut. 

I have this glitter tape from Heidi Swapp but I felt like it's too bold to be qualified as rose gold, so I muted down the color by coating it with Elizabeth Craft's microfine glitter. This glitter also gives a nice smooth, velvety finish.

I embossed with silver and gold embossing powders for some of the facets so that there is a difference in texture. I thought the contrast between the smooth and coarse finish as well as the discrepancy in the shades of silver and gold add quite some interest to this design. 
It is less obvious in this photo, but if you look closely you might notice that some of the diamond shapes are adhered on top of the acetate piece, while others are adhered to the bottom of the cardstock. I thought since some of the areas are too small to fill with shaker elements, I might as well adhere the pieces differently to create some dimension. 
Even though this card took a whole lot of time to execute and finish, I really like how it turned out to be the design I had in mind. I hope it has brought a little sparkle to your day, and thanks for stopping by. :)

Challenges Entered: 
 
Cas-ual Friday: Shaker Cards / Winnie & Walter: CASE W&W (I CASEd the metallic colors in Taheerah's card and made them the focal point of my card.) For a friend (I'm dedicating this to another of my high school friend.) CAS


W&W Gossip Column: Precious Metals / SSS: ATG / Word Art Wednesday 

Powered by Blogger.